| Customization: | Available |
|---|---|
| Certification: | RoHS, ISO, CE |
| IP Rating: | IP65 |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Speed Heavy-duty Push Pull Servo Linear Actuator is a high-speed, heavy-duty push-pull servo linear actuator. It is an electric actuator that is driven by an electric motor and can achieve high-speed, high-load push-pull motion.
This servo Electric Cylinder has large push-pull force and speed, and is suitable for applications requiring fast push-pull motion and the Electric Linear Automation For Applications is variety. It can withstand larger loads and maintain stable motion performance under high load conditions. Therefore, it is often used in industrial automation equipment that requires fast, high-load push-pull movements.
The High Speed Heavy-duty Push Pull Servo Linear Actuator has high accuracy and repeatability, enabling precise control of push and pull position and speed. It adopts a servo control system, which can realize closed-loop control and improve the accuracy and stability of movement.
The linear actuator usually consists of a motor, screw, guide rail and control system. The motor converts the rotational motion into linear push-pull motion by driving the rotational motion of the screw. The guide rail and slider system ensure the stability and accuracy of push and pull movements. The control system can adjust the position and speed of push and pull according to needs to achieve precise motion control, which provide suitable Electric Linear Actuation Solution.
| Linear Actuator | DGRHT-130 | |||||
| Ball Screw | Screw Lead 10mm Diameter 50mm Rated Dynamic Load 6004kgf |
Screw Lead 20mm Diameter 50mm Rated Dynamic Load 5749kgf |
||||
| Max.Motor Power | w | 11000w Servo Motor Rated Torque 70Nm Rated Speed 1500rpm |
7500w Servo Motor Rated Torque 47.7Nm Rated Speed 1500rpm |
11000w Servo Motor Rated Torque 70Nm Rated Speed 1500rpm |
||
| Reduction | 1 | 1.5 | 1 | 1.5 | 3 | |
| Max. Rated Speed | mm/s | 250 | 166 | 500 | 333 | 166 |
| Max. Rated Thrust | N | 37370 | 38190 | 18680 | 28020 | 56050 |
| Max. Rated Torque | N.m | 70 | 71.5 | |||
| Stroke Range | mm | 10-2000mm | ||||
| Axial Backlash | Ground Ball Screw 0.05/Rolled Ball Screw 0.12(Default Rolled) | |||||
| 300mm Lead Tolerance | Ground Ball Screw 0.023/Rolled Ball Screw 0.05(Default Rolled) | |||||
| Repeatable Position Accuracy | Ground Ball Screw ±0.01/Rolled Ball Screw ±0.02(Default Rolled) | |||||
| Limit Switch | NPN,PNP( Both are acceptable ) | |||||
| Inlinel Type | √ | x | √ | x | √ | |
| Parallel Type | √ | √ | √ | √ |
√ | |
Careful Material Selection
1. Use round carbon steel as the cylinder material
2. Select sensor components of internationally famous brands.
3. Key components are made of high-quality materials and processed with vacuum heat treatment or surface treatment (including coating, azotizing, oxidation)
4. Select branded bearings and gears to achieve the best mechanical performance in mechanical structure
5. Select high-quality grease to minimize friction, which enables the drive efficiency to reach up to 90%.
Refined Design and Processing
1. The connection between the screw nut and the piston rod is rigid
2. Snap fastener will be required to locate the part in its fixed position to avoid assembly errors that affect mechanical properties.
3. All screw threads are coated with screw locking adhesive after commissioning to ensure the equipment is stable and trouble-free.
4. Adopt domestic ball screw and bearing products, light load output, high-cost performance
5. All heavy-duty cylinders use sliding key guides. (The square cylinders are using guided rod)
Shenzhen Packway Technology Development Co., LTD, Founded in March 2005, has been at the forefront of innovation, constantly striving to develop cutting-edge technologies and solutions. We currently operate three subsidiary companies, each connected with different sectors of the machinery market.
Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown wooden cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What are your terms of payment?
A: T/T 50% as deposit, and 50% before shipping. We'll show you the photos of the products and packages before
you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10-25 days to produce the products, and 5days by air, 25 days of the ship by sea. The specific delivery time depends on the items and the quantity of your order.
Q5: How is the warranty system?
A: 1~5 years. (upon the deal)
Q6. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q7. What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample cost and the courier cost.
Q8. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.
){kind=link}