OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39

Product Details
Customization: Available
Certification: CCC, RoHS, ISO, CE
IP Rating: IP54/IP65
Gold Member Since 2023

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
  • OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
Find Similar Products

Basic Info.

Model NO.
DGREC-39
Limit Switch
Built-in
Max Thrust
0.21kn
Standard Stroke
10-500mm
Voltage
12VDC/24VDC
Product Appearance
Linear
Appearance
Parallel
Screw Lead
8mm
Diameter
8mm
Transport Package
Boxes/Wooden Cartons
Specification
200w Servo Motor
Trademark
DGR
Origin
Made in China
Production Capacity
50000pieces/Year

Product Description

OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39

Electric servo cylinders have a range of benefits in the healthcare industry since they are safe, efficient, and easy to use. An electric linear actuator uses the rotational motion of a low-voltage DC motor to effectively make products that can pivot and move in various directions. For the healthcare industry, that means producing products for patients and healthcare staff that can lift, tilt, push, and pull in various directions. It makes difficult movements easier and gives patients and staff better access when needed.


Product Parameters
 
Linear Actuator DGREC-39
Ball Screw   Screw Lead 8mm
Diameter 8mm
Rated Dynamic Load 110kgf
Max. Motor Power  w 200w Servo Motor
Rated Torque 0.64Nm Rated Speed 3000rpm
Reduction   1
Max. Rated Speed mm/s 200
Max. Rated Thrust KN 0.21
Max. Rated Torque N.m 0.64
Stroke Range mm 10-500mm
300mm Lead Tolerance mm Ground Ball Screw 0.023/ Rolled Ball Screw 0.05 (Default Rolled)
Inline Type  
Parallel Type  
Note:
1.If you need drawings and life of ball screw, please consult customer service for details.
2.If the maximum stroke exceeds 500mm,it is recommended to add a guide device.
3.The Parameters may be affected by different brands of motors,please consult customer service for details.



Product Features
High Accuracy
Precise position control with repeatability of up to 0.02mm.
High Reliability
Multiple, multiple security measures
Long Life
Run over a distance of 100,000km
Wide Thrust Range
Select famous branded rollerball screws, ball screws, and lead screws which are made of high-quality materials for our electric cylinders in order to reach double the theoretical rated push-pull force.
Careful Material Selection
1. Use round carbon steel as the cylinder material
2. Select sensor components of internationally famous brands.
3. Key components are made of high-quality materials and processed with vacuum heat treatment or surface treatment (including 
    coating, azotizing, oxidation)

4. Select branded bearings and gears to achieve the best mechanical performance in mechanical structure
5. Select high-quality grease to minimize friction, which enables the drive efficiency to reach up to 90%.
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
Refined Design and Processing
1. The connection between the screw nut and the piston rod is rigid
2. Snap fastener will be required to locate the part in its fixed position to avoid assembly errors that affect mechanical properties.
3. All screw threads are coated with screw locking adhesive after commissioning to ensure the equipment is stable and trouble-
   free.

4. Adopt domestic ball screw and bearing products, light load output, high-cost performance
5. All heavy-duty cylinders use sliding key guides. (The square cylinders are using guided rod)
Duty Cycle
Ball screws are used for the frequent operation of electric cylinders, the duty cycle is ensured to be greater than 50% or continuous operation.
Complete Testing
Professional and detailed factory testing: appearance, stroke, noise decibel.
Excellent Service
1. Each DGR electric cylinder is backed by a lifelong tracking service to ensure it can be used normally over its life cycle.
   (including handling product failure, providing spare parts and technical support)

2. DGR Electric cylinder can be custom engineered for customer's particular application.
3. All customer requirements will be responded to within 12 hours.
Wide Selection of Motors
Can choose AC motor, DC motor, stepper motor, servo motor.

Application
Servo Electric Cylinder is widely used in all mechanical field and medical field, to help realize automation.You can see them everywhere, like mechnical devices manufaturing factories, automated production lines, automotive industries,intelligent robot, hospital, racing simulator, stage lift and down, solar panel installation, logistics tools, etc.
 
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39


Certificate Passed
Our factory has passed the certificate: ISO9001/ISO14001/CE/ROHS
 
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
 
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39
OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39



FAQ
Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown wooden cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What are your terms of payment?
A: T/T 50% as deposit, and 50% before shipping. We'll show you the photos of the products and packages before
you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10-25 days to produce the products, and 5days by air, 25 days of the ship by sea. The specific delivery time depends on the items and the quantity of your order.
Q5: How is the warranty system?
A: 1~5 years. (upon the deal)
Q6. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q7. What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample cost and the courier cost.
Q8. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.



Packing&Shipping

OEM Professional Electric Cylinder Manufacturer Electric Actuator Dgrec-39

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier