| Certification: | ISO, CE |
|---|---|
| IP Rating: | IP65 |
| Limit Switch: | Built-in |
| Voltage: | 12V/24V/48V |
| Standard Stroke: | 10-1200mm |
| Max Thrust: | Customized |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier | Electric Linear Actuator Model | DGRLT64 | |||
| Ball Screw | Screw Lead 5mm Diameter 16mm Rated Dynamic Load 1380kgf |
|||
| Max. Motor Power | w | 400w Servo Motor Rated Torque 1.27Nm Rated Speed 3000rpm |
||
| Reducation | 1 | 1.5 | ||
| Max. Rated Speed | mm/s | 250 | 166 | |
| Max. Rated Thrust | KN | 1.36 | 2.03 | |
| Max. Rated Torque | N.m | 1.27 | 1.91 | |
| Axial Backlash | mm | Ground Ball Screw 0.025/ Rolled Ball Screw 0.08 (Default Rolled) | ||
| 300mm Lead Tolerance | mm | Ground Ball Screw 0.023/ Rolled Ball Screw 0.05 (Default Rolled) | ||
| Repeatable Position Accuracy | mm | Ground Ball Screw ± 0.01/ Rolled Ball Screw ± 0.02 (Default Rolled) | ||
| Limit Switch | NPN, PNP (Both are acceptable) | |||
| Inline Type | √ | × | ||
| Parallel Type | √ | √ | ||
1. High Accuracy
Precise position control with repeatability of up to 0.02mm.
2. High Reliability
Multiple, multiple security measures
3. Long Lifespan
Run over a distance of 100,000km
4. Wide Thrust Range
Select famous branded roller ball screws, ball screws, and lead screws which are made of high-quality materials for our electric cylinders in order to reach double the theoretical rated push-pull force.
5. Careful Material Selection
A. Use round carbon steel as the cylinder material.
B. Select sensor components of internationally famous brands.
C. Key components are made of high-quality materials and processed with vacuum heat treatment or surface treatment (including coating, azotizing, oxidation).
D. Select branded bearings and gears to achieve the best mechanical performance in mechanical structure.
E. Select high-quality grease to minimize friction, which enables the drive efficiency to reach up to 90%.
6. Refined Design and Processing
A. The connection between the screw nut and the piston rod is rigid.
B. Snap fastener will be required to locate the part in its fixed position to avoid assembly errors that affect mechanical properties.
C. All screw threads are coated with screw locking adhesive after commissioning to ensure the equipment is stable and trouble-free.
D. Adopt domestic ball screw and bearing products, light load output, high-cost performance.
E. All heavy-duty cylinders use sliding key guides. (The square cylinders are using guided rod).
7. Duty Cycle
Ball screws are used for the frequent operation of electric cylinders, the duty cycle is ensured to be greater than 50% or continuous operation.
8. Complete Testing
Professional and detailed factory testing: appearance, stroke, noise decibel.
9. Excellent Service
A. Each DGR electric cylinder is backed by a lifelong tracking service to ensure it can be used normally over its life cycle. (including handling product failure, providing spare parts and technical support)
B. DGR Electric cylinder can be custom engineered for customer's particular application.
C. All customer requirements will be responded to within 12 hours
10. Wide Selection of Motors
Can choose AC motor, DC motor, stepper motor, servo motor.
If you are familiar with electric cylinders, just choose suitable model on the product page. If you can't confirm how to choose the model, please provide following info, we will recommend appropriate model to you.
1. Thrust(kN)
2. Stroke(mm)
3. Speed(mm/s)
Otherwise, to make a quick and accurate quotation, please also confirm below info if available.
1. The mounting method of electric cylinder
A. Front flange B. Rear flange C. Side flange D.Trunnion E. Guide rod F. Rear hinge plate G. Other
2. Loading connection method
A. Outer thread B. Inner thread C. Fish eye connector D. Y type connector E. I type connector F. Floating connector G. Other
3. The mounting method of motor
A. Direct B. Parallel
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}