High Thrust 2000W Sevro Motor Heavy Duty Electric Cylinder with Long Stroke

• Customization: Available
• Application: Agricultural Machinery, Industrial Automation, Robotics
• Certification: CE, ISO, RoHS
• Model NO.: DGRHT-80
• IP Rating: IP65
• Limit Switch: Built-in
• Max Thrust: 10200n
• Standard Stroke: 2000mm
• Type: Heavy Duty Linear Actuator
• Voltage: DC 12/24V
• Screw Lead: 5mm-25mm
• Diameter: 25mm
• Rated Dynamic Load: 1232kgf-2954kgf
• Rated Torque: 9.55nm
• Rated Speed: 2000rpm
• Transport Package: Wooden Cartons
• Specification: 2000w Servo Motor
• Trademark: DGR
• Origin: Made in China
• HS Code: 8412210010
• Production Capacity: 100PCS/Month

Product Description

Product Description

High Thrust 2000W Sevro Motor Heavy Duty Electric Cylinder with Long Stroke

1.About Price
     
     Due to the product and industry characteristics, linear actuators are always customized and made-to-order.
     The exact quotation varies for the model, configuration and quantity you required, so the prices displayed on this page are for reference only.
     You can go to the customer service and leave your rough requirements and contacts. Packway will match you with professional engineers and provide one-to-one technical support.


2.Product Parameters

Electric servo cylinders have a range of benefits in the healthcare industry since they are safe, efficient, and easy to use. An electric linear actuator uses the rotational motion of a low-voltage DC motor to effectively make products that can pivot and move in various directions. For the healthcare industry, that means producing products for patients and healthcare staff that can lift, tilt, push, and pull in various directions. It makes difficult movements easier and gives patients and staff better access when needed.

 

Linear Actuator	DGRHT-80
Ball Screw		Screw Lead 10mm Diameter 25mm Rated Dynamic Load 2954kgf
Max. Motor Power	w	2000w Servo Motor Rated Torque 9.55Nm Rated Speed 2000rpm
Reducation		1	1.5
Max. Rated Speed	mm/s	333	222
Max. Rated Thrust	KN	5.1	7.6
Max. Rated Torque	N.m	9.55	14.32
Axial Backlash	mm	Ground Ball Screw 0.025/ Rolled Ball Screw 0.08 (Default Rolled)
300mm Lead Tolerance	mm	Ground Ball Screw 0.023/ Rolled Ball Screw 0.05 (Default Rolled)
Repeatable Position Accuracy	mm	Ground Ball Screw ± 0.01/ Rolled Ball Screw ± 0.02 (Default Rolled)
Limit Switch		NPN, PNP (Alternative)
Inline Type		√	×
Parallel Type		√	√

Note:
1.If you need drawings and life of ball screw, please consult customer service for details.
2.If the maximum stroke exceeds 2000mm,it is recommended to add a guide device.
3.The Parameters may be affected by different brands of motors,please consult customer service for details.
 

 

Features

 

High Accuracy
Precise position control with repeatability of up to 0.02mm.
High Reliability
Multiple, multiple security measures
Long Life
Run over a distance of 100,000km
Wide Thrust Range
Select famous branded rollerball screws, ball screws, and lead screws which are made of high-quality materials for our electric cylinders in order to reach double the theoretical rated push-pull force.
Careful Material Selection
1. Use round carbon steel as the cylinder material
2. Select sensor components of internationally famous brands.
3. Key components are made of high-quality materials and processed with vacuum heat treatment or surface treatment (including coating, azotizing, oxidation)
4. Select branded bearings and gears to achieve the best mechanical performance in mechanical structure
5. Select high-quality grease to minimize friction, which enables the drive efficiency to reach up to 90%.
 

 

Refined Design and Processing
1. The connection between the screw nut and the piston rod is rigid
2. Snap fastener will be required to locate the part in its fixed position to avoid assembly errors that affect mechanical properties.
3. All screw threads are coated with screw locking adhesive after commissioning to ensure the equipment is stable and trouble-free.
4. Adopt domestic ball screw and bearing products, light load output, high-cost performance
5. All heavy-duty cylinders use sliding key guides. (The square cylinders are using guided rod)
Duty Cycle
Ball screws are used for the frequent operation of electric cylinders, the duty cycle is ensured to be greater than 50% or continuous operation.
Complete Testing
Professional and detailed factory testing: appearance, stroke, noise decibel.
Excellent Service
1. Each DGR electric cylinder is backed by a lifelong tracking service to ensure it can be used normally over its life cycle. (including handling product failure, providing spare parts and technical support)
2. DGR Electric cylinder can be custom engineered for customer's particular application.
3. All customer requirements will be responded to within 12 hours
Wide Selection of Motors
Can choose AC motor, DC motor, stepper motor, servo motor.
 

 

Application

 

FAQ

Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown wooden cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What are your terms of payment?
A: T/T 50% as deposit, and 50% before shipping. We'll show you the photos of the products and packages before
you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10-25 days to produce the products, and 5days by air, 25 days of the ship by sea. The specific delivery time depends on the items and the quantity of your order.
Q5: How is the warranty system?
A: 1~5 years. (upon the deal)
Q6. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q7. What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample cost and the courier cost.
Q8. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.
 

Certifications

 

Packaging & Shipping