| Customization: | Available |
|---|---|
| Flange: | With Flange |
| Nut Number: | Double |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
6-axis motion platforms offer a number of advantages, including:
High precision: 6-axis motion platforms can move an object in very small increments. This is important for accurate testing and simulation. For example, when testing a car's suspension system, the platform can be used to simulate small bumps and vibrations that the car would encounter on real roads.
Versatility: 6-axis motion platforms can move an object in 6 different axes. This makes them suitable for a wide range of applications. For example, to simulate the launch of a spacecraft, the platform can be used to push the spacecraft upward and then place it into orbit.
Durability: 6-axis motion platforms are designed to withstand harsh environments. For example, in the testing of a cross-country vehicle, the platform can withstand the shocks and impacts that the vehicle would encounter in bad conditions.
Enhanced safety: 6-axis motion platforms can be used to train operators in dangerous or hazardous environments without putting them at risk. For example, a 6-axis motion platform can be used to train a forklift operator how to operate a forklift safely in a warehouse environment.
Improved efficiency: 6-axis motion platforms can be used to test and optimize manufacturing processes and assembly lines. This can lead to improved efficiency and reduced costs.
Enhanced product quality: 6-axis motion platforms can be used to test products under real-world conditions. This can help to identify and eliminate potential defects, resulting in higher quality products.
Reduced downtime: 6-axis motion platforms can be used to predict and prevent equipment failures. This can help to reduce downtime and improve productivity.
Increased innovation: 6-axis motion platforms can be used to prototype and test new products and technologies in a safe and controlled environment. This can help to accelerate the innovation process.
1. About price
Electric linear actuators and simulation platforms are customized products, so the prices may vary from different specifications. The price on the page is just for reference, the actual final price is decided by the model selection.
2. Multiple Solutions
We can not only provide complete integrated simulators, but also semi-made simulators, like the 3dof/4dof/5dof/6dof/7dof simulation platforms or just certain electric linear actuators, then users can set up the simulator by themself to save total cost.
3. Can I get help if I set up a simulator by myself?
Absolutely Yes, we will provide technical support, advice, as well as motion platform manuals, servo motor manuals and driver manuals, etc.
| Technical Parameters of Electric Cylinder | |
| Electric cylinder model | DGRHT-63-T10-L400-I-S500-F1.2-P750-i1 |
| Rated load | 1.2KN |
| Effective stroke | 400mm |
| Rated speed | 500mm/s |
| Screw lead | 10mm |
| Repeatable screw lead | ±0.5mm |
| Reduction | 1:1 |
| Internal transmission structure | Roller screw |
| Type of drive motor | Servo motor |
| Limit detection | None |
| Corrosion resistance rating | V<0.0003g/m2*h |
| Protection grade | IP54 |
| Operating ambient temperature | 0ºC-40ºC |
| Material of surface | 20# carbon steel, surface painting |
| Material of the telescopic rod | 20# high-alloy steel |
| Power supply of the motor driver | AC220V |
| Technical Parameters of 6DOF VR Dynamic Simulator Platform | |
| Maximum load capacity | 100kg(up to 1 person) |
| Effective travel range for pitch, roll, yaw directions | ±20° |
| Angular velocity adjustable range | ±30°/s |
| Angular acceleration | ±30°/s2 |
| Positioning accuracty | ±1° |
| Repeatability accuracy | ±0.5° |
| Vertical, horizontal and lifting/descending adjustable range | ±350mm |
| Vertical lifting/descending speed adjustable range | ±500mm/s |
| Acceleration | ±500mm/s2 |
| Positioning accuracy | ±1mm |
| X lateral and Y longitudinal speed adjutable range | ±500mm/s |
| Repeatability accuracy | ±0.5mm |
Best price for 6 DOF/3 DOF simulation platforms. Rich experience of driving, flight, racing, ship, boat, truck, cockpit, cabin units simulation platform's construction. Customization is always available.
1.Electric cylinder
Adopt metallurgical standard raw material to make the cylinder body-round type or squared type; C7 grade ball screw matches with servo motor achieving a high repeatable position accuracy up to ±0.02mm.
2.Motors
Servo motor/stepper motor/general motor are available with protection grade IP54/IP65/IP66. We offer a wide torque range from 0.16N.m to 700N.m to support a small to large force capacity.
3.Drives
Usually, the drive will match with configured motor. We provide a wide range of choices that support pulse/analog/serial communication protocols; RS232, RS485, CANopen, EtherCAT are available.
4.Limit switch/sensor
Position feedback is available. NPN/PNP limit switch for choosing.
5.Lifespan
Run over a distance of 100,000km.
6.Duty cycle
The duty cycle is ensured to be greater than 50% or continuous operation.
Shenzhen Packway Technology Development Co., LTD, founded in March 2005, has been at the forefront of innovation, constantly striving to develop cutting-edge technologies and solutions. We currently operate three subsidiary companies, each connected with different sectors of the machinery market.
History of the three branches:
Shenzhen Superworker Technology Co., LTD, established in June 2011, is an innovative enterprise specialized in industrial packaging. The main products and services include: automatic mechanical equipment (steel belt /PET belt strapping machine, clipping belt machine, marking spray machine, labeling machine, etc.), intelligent industrial packaging unit (coil, wire, plate, etc.), intelligent coil logistics system, transformation and upgrading services of similar products, repair and maintenance services of related equipment, supply of wearing parts and consumables. The SUPERWORKER has strong R&D strength and Customers from both domestic and international markets.
With the wide application of automation equipment, Shenzhen Dagongren Electric Cylinder Technology Co., Ltd came into being in 2014. We are engaged in designing and manufacturing linear motion products, including servo/stepper motor electric cylinders, linear actuators, multi-degree of freedom platforms, synchronization lifting platforms, VR simulators, etc, with features of high positioning accuracy, low noise, and long life. Our products have been widely used in automated warehousing, robotics, automation equipment, medical equipment, and AGV, vehicles, etc.
Works Hydraulic Technology (Dongguan) Co..Ltd, deeply rooted in the hydraulic, electronic control, and mechanical related industries, focuses on the research and development, production, and sales of electromechanical and hydraulic products. With a professional approach to providing personalized solutions for customers as the main model. Works mainly produces various hydraulic equipment, lubrication equipment, electronic control systems, hydraulic cylinders, and other products.
Q1. What are your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown wooden cartons. If you have a legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What are your terms of payment?
A: T/T 50% as deposit, and 50% before shipping. We'll show you the photos of the products and packages before you pay the balance.
Q3. What are your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 10-25 days to produce the products, and 5days by air, 25 days of the ship by sea. The specific delivery time depends on the items and the quantity of your order.
Q5: How is the warranty system?
A: 1~5 years. (upon the deal)
Q6. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q7. What is your sample policy?
A: We can supply the sample, but the customers have to pay the sample cost and the courier cost.
Q8. Do you test all your goods before delivery?
A: Yes, we have a 100% test before delivery.
Multiple layers packaging, ensure customers receiving the best products.
){kind=link}